Steel framing is widely used in commercial building construction, mostly due to its durability, ease of usage, cost-effectiveness, and customizability. The right frames must be used during the construction process, as frames provide support and stability to buildings.

For builders who wish to construct their commercial buildings with steel framing, here is a proper guide on how to go about the installation.

Getting The Right Tools

The first step to take in the installation process of steel framing in a commercial building is to get the adequate tools and machinery that are required.

Most of this equipment can be obtained by renting or outrightly purchasing them. Working with steel studs requires some form of expertise or prior knowledge. Builders can get sufficient equipment for this at local building rental stores. Some of the needed tools are:

Install The Lowermost Track

Most commercial buildings require vapor barriers or wall insulation for their foundation walls; they are usually installed before framing begins. The floor track is slashed to a sufficient size; this is done firstly by chopping flanges with snips. One of the flanges is then placed backward, allowing the track network to be cut.

Installation Of The Top Track

The next step to take during the installation process of steel frames on a commercial building is to work on the top track. The frame’s upper track should be installed likewise to that of the lower track. This can be performed without considerable difficulty by the use of a stud that is modified for positioning of the upper track.

Cutting The Studs

After the installation of the top track, the next process is the cutting of the studs. The metal studs should be cut to quantity with aviation snips. For larger jobs, the studs should be slashed with a chop. It should be noted though, that this procedure generates a large barrage of sparks, a lot of sounds, and tons of smoke. It is advised that during this exercise, builders should make use of eye and ear protection if power equipment is used.

Installing The Studs

The obvious next process to take after the studs have been cut is the installation process. The Installation process of the studs pertains to making certain that they are all plumb and aligned to make sure that all openings are straight. The first studs are fixed by first plopping them into the lid and lowest tracks. The studs are then clamped with C-clamps to the track, and the floor of the steel stud is safeguarded with screws.

Installing Drywall

After all the above processes have been done, the next procedure to take is the installation of drywall. Drywall installation for metal studs is not particularly unique from that of wood framing, although it can take some skill to make sure the screws are pinched properly into the steel. One way to achieve this is by applying massive horizontal pressure on the drill while driving the screws.

In Conclusion

It is advised that builders use steel framing in the construction of commercial buildings, as steel framing will not only enable the building to have flexibility but it will also make the building durable, customizable, long-lasting, well-secured, and protected. In this blog post, we’ve explained how to install steel framing in commercial constructions.